Ferno Saver Scoop Stretcher
Order Code: HSBSSS-265
The saver scoop stretcher is designed so emergency personnel can uncouple either or both ends of the stretcher and gently scoop up the patient using a scissor-type closing motion. This scoop stretcher is ideal for hip and spinal injuries. The stretcher supports a patient in the position found, reducing risk of further injury.
- Weight 9.7kg
- Load limit 159kg
- Length 120cm (folded 166cm (open) 201cm (max)
- Width 43cm
- Telescoping tubes allow length adjustments
- Open centre design allow patients to be x-rayed
- Folds for compact storage

|
|
 |
Ferno Vertical Rescue Stretcher
Order Code: VRES STRETCH
The Ferno Vertical Rescue Stretcher is ideal for high angle, confined space, horizontal or vertical rescue and evacuations. The wrap-around concept gives the patient a feeling of security and protects limbs from further injury during evacuation procedures.
- Weight 8kg
- Load limit horizontal 350kg
- Load limit vertical 250kg
- Length 202cm
- Width 77cm
- Comes with Cordura storage backpack

|
|

|
CMC Rescue Vertical-Lift Stretcher Harness
Order Code: HSCMC724133
The Vertical Lift Stretcher Harness eases the transition over an edge when a high anchor point is not available, such as a parapet roof, out a window, off a tank top or over a handrail. This reduces the manpower requirements, improves patient care and reduces risk. The spreader bar allows the stretcher to pivot between the side straps.
- Weight 1.3kg
- Delta quick link included
- Constructed of 2720kg breakforce, 25mm flatweb
- Light weight buckles allow easy adjustment
|
|

|
Ferno Adjustable Lifting Bridle
Order Code: HSBRB-TLB (24mm screw gate karabiner) HSBRB-TLB-TX11S (65mm screwgate karabiner)
- For use with with Ferno 71 series stretchers
- Individually adjustable arms
- Drop forged lifting ring, adjusters and sliding bar buckles
- UV resistant webbing rated at 2250kg (22kN)
- Additional wear strips where hardware meets webbing
- Bright orange tabs for easy adjustment
- Supplied with 4 steel screw gate karabiners

|
|

|
Res-Q-Mate Lifting Bridle
Order Code: HSBRB-2063
Designed for Res-Q-Mate stretcher. The bridle is fixed in length for weight distribution and supplied with four light-weight karabiners.

|
|

|
Oxy-Therapy Kit
Order Code: HSOXK-T
The Oxy-Therapy kit contents are suitable for the delivery of oxygen therapy in the home or workplace. It can also be used in an emergency to resuscitate using the Ferno E-Mask.
Kit includes:
- Multiflow regulator 0.25 to 25LPM
- Three adult and child therapy masks
- Pocket mask with 02 inlet, face strap and case
- Cylinder spanner
Kit excludes oxygen cylinder and softpack

|
|

|
Ferno E-Mask
Order Code: HSRMF-EM (Mask) HSRMF-EMOWV (One-way valve/filter)
The one-way valve and directional diaphragm on the Ferno E-Mask allows no backflow of air or contaminants (fluids) to pass from the patient to rescuer/ rescuer to patient and provides superior protection against viruses and bacteria.
- Comes with 2 port, headstrap and hard shell case
- Fits both adults and children
- Mask can be sterilised and replacement
valve attached
- Can be used with Oxy-Therapy kit

|
|

|
Laerdal Stiff Neck Collars
Order Code: HSCCL-SCT (Adult tall) HS CCL-SCR (Adult regular) HSCCL-SCS (Adult short) HSCCL-SCN (Adult no neck) HSCCL-SCP (Paediatric) HS CCL-SCB (Baby no neck)

|
|

|
|